| Quantity: | |
|---|---|
Flange gasket
1.Items Name: Flange Fitting Gasket
2.Material:EPDM/FPM
3.Size:20mm to 400mm
4.Color: Black
6.Standard: DIN standard ,ASTM
7.Certificate:CE,ISO,SGS
Character :high breaking strength, high tensile strength ,high resistant to oil ,acids ,alkalies and other corrosives fluids, ageing-resistance ,long life ,good at sealing .Bearing pressure both sides and pressure is similar, low hysteretic, non-slip effect.
| Certificate of Analysis(COA) | |||||
| Company Name | Jiangsu Huasheng Plastic Co.,Ltd | ||||
| Test Project | Material | EPDM | |||
| Standard Value | Test Value | Test Method | |||
| Physical Performance | Hardness（Shore A）℃ | 65±5 | 64 | OK | GB/T531-2008 |
| Tensile Strength，Minimum，MPa | 9 | 12 | OK | GB/T528-2009 | |
| Tensile Yield，Minimum，% | 300 | 460 | OK | GB/T528-2009 | |
| Heat resistance experiment | Test Condition 70℃*70H | ||||
| Hardness Change，℃ | 0- +10 | 4 | OK | GB/T3512-2001 | |
| Tensile Strength Change Rate，Maximum,（%） | -25 | -13 | OK | ||
| Tensile Yield Change Rate， Maximum,(%) | -35 | -25 | OK | ||
| Compression Test | Test Condition 70℃*72H | ||||
| Compression Permanent Deformation，Maximum （%） | 35 | 25 | OK | GB/T7759-1996 | |
| Cold Resistance Test | Brittleness Temperature | -40 | -40 | OK | GB/T1682-1994 |
| Conclusion | OK | Test | |||
| Flange Gasket EPDM / FPM | |||||||
| Size DN（De） | Dimension（mm） | ||||||
| D0 | D1 | D2 | da | H | L | n | |
| 15(20) | 93.00 | 16.00 | 65.00 | 14.00 | 3.00 | 115.00 | 4 |
| 20(25) | 103.00 | 21.00 | 75.00 | 14.00 | 3.00 | 125.00 | 4 |
| 25(32) | 113.00 | 28.00 | 85.00 | 14.00 | 3.00 | 135.00 | 4 |
| 32(40) | 138.00 | 36.00 | 100.00 | 18.00 | 3.00 | 160.00 | 4 |
| 40(50) | 148.00 | 45.00 | 110.00 | 18.00 | 3.00 | 170.00 | 4 |
| 50(63) | 163.00 | 57.00 | 125.00 | 18.00 | 3.00 | 185.00 | 4 |
| 65(75) | 183.00 | 69.00 | 145.00 | 18.00 | 3.00 | 205.00 | 4 |
| 80(90) | 198.00 | 83.00 | 160.00 | 18.00 | 3.00 | 220.00 | 8 |
| 100(110) | 218.00 | 103.00 | 180.00 | 18.00 | 3.00 | 250.00 | 8 |
| De125 | 248.00 | 117.00 | 210.00 | 18.00 | 3.00 | 280.00 | 8 |
| 125(140) | 248.00 | 131.50 | 210.00 | 18.00 | 3.00 | 280.00 | 8 |
| 150(160) | 283.00 | 151.00 | 240.00 | 22.00 | 3.00 | 315.00 | 8 |
| De180 | 283.00 | 166.00 | 240.00 | 22.00 | 3.00 | 315.00 | 8 |
| De200 | 338.00 | 190.00 | 295.00 | 22.00 | 3.00 | 370.00 | 8 |
| 200(225) | 338.00 | 203.00 | 295.00 | 22.00 | 3.00 | 370.00 | 8 |
| De250 | 393.00 | 239.50 | 350.00 | 22.00 | 3.00 | 430.00 | 12 |
| 300(315) | 443.00 | 302.00 | 400.00 | 22.00 | 3.00 | 485.00 | 12 |
| 350(355) | 500.00 | 320.00 | 450.00 | 22.00 | 3.00 | 550.00 | 16 |
| 400(400) | 550.00 | 350.00 | 500.00 | 22.00 | 3.00 | 590.00 | 16 |
Administrators have overseas education background or working experiences, they introduce up-to-date management skills and cutting-edge technologies to the team
Over 200 injection machines, 80 mechanical processing equipment, including machinery imported from Taiwan, Japan and Germany
Huasheng established in 1988 who had over 20 years of experience in plastic extrusion and injection
24-hour Rigorous QC Team that follows ISO 9001 quality management system
A rounded system of up-to-date software and testing equipment for R&D
Equipped with a professional factory, Huasheng Plastic is one of the best manufacturers in China who can offer you pvc flange gasket,epdm fpm type fitting. We can also offer you the pricelist consultation of pvc flange gasket,epdm fpm type fitting, welcome to buy our customized products.
Flange gasket
1.Items Name: Flange Fitting Gasket
2.Material:EPDM/FPM
3.Size:20mm to 400mm
4.Color: Black
6.Standard: DIN standard ,ASTM
7.Certificate:CE,ISO,SGS
Character :high breaking strength, high tensile strength ,high resistant to oil ,acids ,alkalies and other corrosives fluids, ageing-resistance ,long life ,good at sealing .Bearing pressure both sides and pressure is similar, low hysteretic, non-slip effect.
| Certificate of Analysis(COA) | |||||
| Company Name | Jiangsu Huasheng Plastic Co.,Ltd | ||||
| Test Project | Material | EPDM | |||
| Standard Value | Test Value | Test Method | |||
| Physical Performance | Hardness（Shore A）℃ | 65±5 | 64 | OK | GB/T531-2008 |
| Tensile Strength，Minimum，MPa | 9 | 12 | OK | GB/T528-2009 | |
| Tensile Yield，Minimum，% | 300 | 460 | OK | GB/T528-2009 | |
| Heat resistance experiment | Test Condition 70℃*70H | ||||
| Hardness Change，℃ | 0- +10 | 4 | OK | GB/T3512-2001 | |
| Tensile Strength Change Rate，Maximum,（%） | -25 | -13 | OK | ||
| Tensile Yield Change Rate， Maximum,(%) | -35 | -25 | OK | ||
| Compression Test | Test Condition 70℃*72H | ||||
| Compression Permanent Deformation，Maximum （%） | 35 | 25 | OK | GB/T7759-1996 | |
| Cold Resistance Test | Brittleness Temperature | -40 | -40 | OK | GB/T1682-1994 |
| Conclusion | OK | Test | |||
| Flange Gasket EPDM / FPM | |||||||
| Size DN（De） | Dimension（mm） | ||||||
| D0 | D1 | D2 | da | H | L | n | |
| 15(20) | 93.00 | 16.00 | 65.00 | 14.00 | 3.00 | 115.00 | 4 |
| 20(25) | 103.00 | 21.00 | 75.00 | 14.00 | 3.00 | 125.00 | 4 |
| 25(32) | 113.00 | 28.00 | 85.00 | 14.00 | 3.00 | 135.00 | 4 |
| 32(40) | 138.00 | 36.00 | 100.00 | 18.00 | 3.00 | 160.00 | 4 |
| 40(50) | 148.00 | 45.00 | 110.00 | 18.00 | 3.00 | 170.00 | 4 |
| 50(63) | 163.00 | 57.00 | 125.00 | 18.00 | 3.00 | 185.00 | 4 |
| 65(75) | 183.00 | 69.00 | 145.00 | 18.00 | 3.00 | 205.00 | 4 |
| 80(90) | 198.00 | 83.00 | 160.00 | 18.00 | 3.00 | 220.00 | 8 |
| 100(110) | 218.00 | 103.00 | 180.00 | 18.00 | 3.00 | 250.00 | 8 |
| De125 | 248.00 | 117.00 | 210.00 | 18.00 | 3.00 | 280.00 | 8 |
| 125(140) | 248.00 | 131.50 | 210.00 | 18.00 | 3.00 | 280.00 | 8 |
| 150(160) | 283.00 | 151.00 | 240.00 | 22.00 | 3.00 | 315.00 | 8 |
| De180 | 283.00 | 166.00 | 240.00 | 22.00 | 3.00 | 315.00 | 8 |
| De200 | 338.00 | 190.00 | 295.00 | 22.00 | 3.00 | 370.00 | 8 |
| 200(225) | 338.00 | 203.00 | 295.00 | 22.00 | 3.00 | 370.00 | 8 |
| De250 | 393.00 | 239.50 | 350.00 | 22.00 | 3.00 | 430.00 | 12 |
| 300(315) | 443.00 | 302.00 | 400.00 | 22.00 | 3.00 | 485.00 | 12 |
| 350(355) | 500.00 | 320.00 | 450.00 | 22.00 | 3.00 | 550.00 | 16 |
| 400(400) | 550.00 | 350.00 | 500.00 | 22.00 | 3.00 | 590.00 | 16 |
Administrators have overseas education background or working experiences, they introduce up-to-date management skills and cutting-edge technologies to the team
Over 200 injection machines, 80 mechanical processing equipment, including machinery imported from Taiwan, Japan and Germany
Huasheng established in 1988 who had over 20 years of experience in plastic extrusion and injection
24-hour Rigorous QC Team that follows ISO 9001 quality management system
A rounded system of up-to-date software and testing equipment for R&D
Equipped with a professional factory, Huasheng Plastic is one of the best manufacturers in China who can offer you pvc flange gasket,epdm fpm type fitting. We can also offer you the pricelist consultation of pvc flange gasket,epdm fpm type fitting, welcome to buy our customized products.
