Top 12 PVC Pipe Manufacturers in Saudi Arabia 2026

Introduction: Why PVC Pipes Matter in Saudi Arabia

PVC pipes carry much of the water, sewage and cable infrastructure behind Saudi Arabia's building boom. They are lightweight, corrosion-resistant and easy to install, which makes them a first choice for municipal networks, giga-projects, farms and industrial plants across the Kingdom. In 2026, with Vision 2030 projects still driving demand, choosing reliable PVC pipe manufacturer matters more than ever.

This guide ranks 12 PVC pipe manufacturers and suppliers serving Saudi Arabia in 2026. It covers leading local factories in Riyadh, Jeddah, Dammam and Madinah, plus one international exporter, so buyers, contractors and consultants can compare them in one place.

Key Applications of PVC Pipes in Saudi Arabia

• Water Supply: Potable water distribution and transmission mains built with uPVC pressure pipes

• Sewerage and Drainage: Gravity sewers, stormwater lines and building soil, waste and vent (DWV) systems

• Irrigation and Agriculture: Farm trunklines, deep-well headers and subsoil drainage

• Electrical and Telecom: Rigid PVC conduit and duct banks for power and fiber cables

• Industrial and Hot Water: CPVC pipes for hot water and chemical lines up to 93°C

Advantages of PVC Pipes

• Corrosion Resistance: Unaffected by saline groundwater and aggressive soils that attack metal pipes

• Lightweight: Faster handling and lower installation cost on large projects

• Smooth Bore: Low friction loss, so pumps use less energy

• Cost-Effective: Low material and maintenance cost over a long service life

• Easy Jointing: Solvent-cement or rubber-ring joints that go together quickly on site

Saudi Arabia PVC Pipe Market Overview

Saudi Arabia's PVC pipe market is large and still growing, led by water, sewerage and construction demand. Research firms publish different figures, so the numbers below should be read as ranges rather than one agreed total.

Market Size and Growth Outlook

• MarkNtel Advisors values the Saudi PVC pipes market at around USD 1.30 billion in 2025, rising to USD 1.67 billion by 2032, a CAGR of about 3.6%.

• Ken Research puts the wider plastic pipes and fittings market (PVC, HDPE, PP-R, CPVC and others) at USD 2.42 billion in 2025, reaching USD 3.4 billion by 2031.

• Industry reports from IMARC name sewerage and drainage as the largest application segment.

Key Demand Drivers

• Vision 2030 and giga-projects: NEOM, the Red Sea, Diriyah and large housing programs need pipes in bulk.

• Water security: Saudi Arabia relies on desalination, and its networks are being expanded and renewed.

• Urban growth: Riyadh, Jeddah and Dammam keep adding homes, towers and utility corridors.

• Domestic resin supply: Local PVC resin and compounds help factories keep production in the Kingdom.

Local Manufacturers vs Imports

Local factories supply most standard uPVC and CPVC pipes, backed by long-established brands founded as far back as the 1960s. Imports mainly fill gaps in specialty products, large-volume tenders and fittings, which is where international exporters compete.

How We Selected the Top 12 PVC Pipe Manufacturers

We compared manufacturers using public company information, industry reports and project references. Each company was judged on:

• Manufacturing base: Own extrusion plants in Saudi Arabia, or proven export capacity for overseas suppliers

• Product range: uPVC, CPVC, conduit and drainage pipes, and matching fittings

• Certifications and standards: ISO management systems, SASO, and ASTM, DIN, BS or NEMA product standards

• Approvals and project record: Saudi Aramco vendor status, utility approvals and large infrastructure references

• Market reputation: Years in operation, distribution reach and mentions in market reports

The ranking reflects overall fit for Saudi projects, not a single score. Figures such as founding year and capacity are company-stated and may change, so confirm them with the supplier before placing an order.

Top 12 PVC Pipe Manufacturers in Saudi Arabia at a Glance

Top 12 PVC Pipe Manufacturers in Saudi Arabia in 2026

1. Huasheng Pipeline

Huasheng Pipeline Technology Co., Ltd. was established in 1988 and makes UPVC, CPVC, clear PVC and HT-PVC pipes, fittings and valves for industrial, water supply and water treatment projects. Its plastic pipeline systems reach an annual capacity of 80,000 tons. The company holds ISO 9001, ISO 14001, CE and NSF certifications and produces to DIN, ISO, ASTM and JIS standards. Products are exported to more than 50 countries, including markets in the Middle East.

For Saudi buyers, Huasheng offers UPVC pipe to DIN standard and ASTM D1785, CPVC pipe to ASTM F441, and matching PN10, PN16, SCH40 and SCH80 PVC fittings. It also supplies PVC valves and OEM customization such as colour and coating. See the full product range.

Best for: Importers, distributors and contractors who need one supplier for pipes, fittings and valves, or custom OEM products.

2. Saudi Plastic Products Company

SAPPCO was founded in 1970 and is one of the best-known plastic pipe makers in the Kingdom. The group runs four manufacturing plants in Riyadh and Dammam producing uPVC, CPVC and PE pipes, connections and fittings. A SABIC partner profile describes its CPVC compound as the only one produced domestically in Saudi Arabia, covering pipes from 1/2" to 10" for hot water. Its range also includes PVC pipes for potable water, irrigation, drainage and cable duct, and large-diameter uPVC pipes for sewerage. Its Dammam factory has held ISO 9001:2015 certification from TÜV NORD.

Best for: Municipal water and sewer tenders and projects that need a wide local product range.

3. Neproplast(New Products Industries Co. Ltd.)

Neproplast was established in Jeddah in 1968 and is widely described as the first factory in the Kingdom to produce PVC pipes. It added fittings production in 1970 and polyethylene (HDPE) pipes in 2009. From the mid-1980s it produced ASTM Schedule 40 and 80 PVC pipes and CPVC Schedule 80 pipes, and its drinking water products are NSF accredited. The factory belongs to the IKK Group, which reports five manufacturing facilities in Jeddah, and sells through National Marketing (NAMAT), whose branches cover the Kingdom.

Best for: Water, electrical and telecom pipe supply with strong distribution across Saudi cities.

4. Al Watania Plastics

Al Watania Plastics is a fully owned subsidiary of Al Watania for Industries, set up in 1982 in Riyadh to make construction, industrial and consumer plastic products. It added extrusion lines using European technology to produce uPVC and CPVC pipes up to 400 mm in diameter, in classes for both pressure and non-pressure use. A market report records that in November 2024 the parent company commissioned new machinery to expand its PVC pipe capacity.

Best for: Large-diameter uPVC and CPVC pipes for infrastructure work in the central region.

5. Arabian Gulf Manufacturers Ltd

Arabian Gulf Manufacturers, also known as Gulfmaid, has made plastic products in Jeddah since the 1960s and is one of the Kingdom's older industrial groups. Its Jeddah Industrial City plant extrudes uPVC and CPVC pipes from 1/2" to 8" under the AGM brand. Company coverage describes ISO-certified products approved across Saudi Arabia, the Gulf states and several other countries in the region. Pipes are only part of a much wider plastics business.

Best for: Building services and general infrastructure pipe supply from the western region.

6. National Factory for Plastic Industry

National Factory for Plastic Industry operates from Jeddah Industrial City 1 and presents itself as a Saudi Aramco approved manufacturer and supplier of uPVC pipes. Market research reports list NFP among the leading Saudi PVC pipe players. Note that it is a different company from National Pipe Company (NPC), which makes large-diameter steel line pipe.

Best for: Buyers who need uPVC pipe from an Aramco-approved local factory.

7. ALFA AL-ARABIA

ALFA AL-ARABIA for Industry has made thermoplastic pipes in Jeddah's 3rd Industrial City since 2010. Its range covers uPVC pressure pipes to DIN 8062 (PN 6 to PN 25), ASTM D1785 Schedule 40 and 80 pipes, CPVC pipes rated to 93°C, DIN 19534 gravity sewer pipes, building drainage, NEMA TC-2 conduit and perforated drainage pipes, from 16 mm to 500 mm. It lists Saudi Aramco vendor code 10116102 and ISO 9001, 14001 and 45001 certification, and supports consultants with material approval submittals and online calculators.

Best for: Projects that need full technical documentation and an Aramco-registered vendor.

8. Beta Green Plastic Factory

Beta Green was founded in 2002 and produces uPVC and PVC pipe systems from a 40,000 m² plant in Madinah, with annual output of more than 5,000 tons. Its seven product systems include agriculture pipes, CPVC, electrical conduit, sewerage, SWR, uPVC water main pipes and PVC duct. The factory reports ISO 9001:2015 and ISO 14001:2015 certification, SASO compliance, and supply to utilities, municipalities and giga-projects such as NEOM and Qiddiya.

Best for: Government, municipal and giga-project supply from the western region.

9. Al Jazira Extensions Industrial Company

Al Jazira Extensions describes itself as one of the larger plastic product manufacturers in the Kingdom and operates in Jeddah's Third Industrial City. Its PVC range includes rigid electrical conduit to NEMA TC-2, made from grey ASTM D1784 compound, plus perforated PVC pipes from 75 mm to 500 mm and slotted pipes made to RDA requirements for groundwater control. The company also lists separate uPVC and CPVC pipe ranges.

Best for: Electrical conduit and subsoil drainage pipes.

10. Almunif Pipes

Almunif Pipes (linked to the MMP Group in market research) makes uPVC, CPVC, GRP, PP-R and HDPE pipes and fittings, and states that it has been operating for more than 30 years. Because it covers several materials, it suits buyers who want to source different pipe types from one factory.

Best for: Projects that mix PVC, CPVC and PE or PP-R systems.

11. Arabian Plastic Manufacturing Company

Aplaco has supplied PVC and CPVC pipe fittings for almost four decades, for use in Saudi Arabia and for export. It works to ASTM standards for PVC and CPVC compounds and supplies hospitals, schools, universities and industrial cities across the Kingdom.

Best for: PVC and CPVC fittings alongside pipe supply.

12. M.T.Plast (Modern Technology Factory for Plastic)

M.T.Plast began producing uPVC pipes in 1997 and operates from Riyadh's Second Industrial City. Its plant has extrusion and injection moulding machinery, a laboratory and storage facilities, and it makes uPVC pipes and fittings for the local market.

Best for: Mid-size orders of uPVC pipes and fittings in the central region.

PVC Pipe Types and Standards Used in Saudi Arabia

Saudi specifications mix American, British, German and international standards, so check which one your project calls for before ordering.

uPVC vs CPVC vs PVC Conduit

• uPVC (unplasticized PVC): Rigid pipe for cold potable water, sewer and drainage lines, typically up to about 60°C.

• CPVC (chlorinated PVC): Heat-resistant pipe for hot water and chemical lines, rated up to 93°C.

• PVC conduit: Non-conductive pipe that protects power and telecom cables, often to NEMA TC-2.

Common Standards

Schedule 40 vs Schedule 80

Schedule 80 pipe has a thicker wall than Schedule 40 for the same diameter, so it handles higher pressure at the cost of a smaller bore. For a detailed comparison, read our guide to Schedule 40 vs Schedule 80 PVC pipe and the PVC pipe dimensions chart.

Tips for Choosing a PVC Pipe Manufacturer in Saudi Arabia

• Check certifications first: Ask for ISO 9001, SASO and product standard certificates, and for NSF or equivalent proof on drinking water pipes.

• Confirm project approvals: Utility, municipal and Saudi Aramco projects often require approved vendors and material approval submittals.

• Look at climate performance: Pipes for exposed or desert use need UV-stabilized, heat-resistant compounds, and drinking water pipes should use lead-free stabilizers.

• Match the standard to the specification: DIN, ASTM, BS and NEMA products are not interchangeable.

• Compare capacity and lead time: Large tenders need a supplier that can deliver phased batches on schedule.

• Ask for technical support: Good suppliers provide test reports, datasheets and sizing help.

• Weigh price against performance: The lowest quote is not the cheapest option if the pipe fails early or is rejected by the consultant.

Imported vs Locally Made PVC Pipes in Saudi Arabia

Local factories and international exporters each have a place in Saudi supply chains. The right choice depends on the product, the specification and the schedule.

Imported pipes must still meet Saudi technical regulations, and regulated building products normally need SASO conformity documentation. Confirm the exact requirements with your customs broker or the supplier before shipping.

Many buyers combine both routes: local pipe for standard sizes and an international supplier for fittings, valves, clear PVC and other specialty items. Exporters such as Huasheng serve this second need, with PVC, CPVC, PPH and PE systems made to DIN, ASTM and JIS standards.

Frequently Asked Questions

Who are the leading PVC pipe manufacturers in Saudi Arabia?

Saudi Plastic Products Company (SAPPCO), Neproplast, Al Watania Plastics, Arabian Gulf Manufacturers and National Factory for Plastic Industry appear most often in market reports. Newer factories such as ALFA AL-ARABIA and Beta Green also supply major projects.

What standards must PVC pipes meet in Saudi Arabia?

Pipes must meet Saudi technical regulations and SASO requirements. Specifications also commonly call for ISO, DIN 8062, ASTM D1785, ASTM F441, BS 3505 and NEMA TC-2, depending on the application.

Is uPVC safe for drinking water in Saudi Arabia?

Yes, when the pipe is made from lead-free, non-toxic formulations and certified for potable use. Look for NSF or equivalent certification and approval from the relevant water authority.

What is the difference between uPVC and CPVC?

uPVC suits cold water, sewer and drainage lines. CPVC is chlorinated for higher heat resistance and handles hot water and chemical lines up to 93°C.

Can I import PVC pipes from China to Saudi Arabia?

Yes. Many importers and contractors buy PVC pipes, fittings and valves from Chinese manufacturers, as long as the products meet Saudi regulations and carry the required conformity documents. Ask your supplier for test reports and certificates before ordering.

Which PVC pipe type is used for sewers?

Gravity sewers normally use non-pressure uPVC pipe with rubber-ring joints, specified by ring stiffness such as SN4 or SN8 under standards like DIN 19534 or EN 1401.

How long do uPVC pipes last?

When designed and installed to standard, uPVC systems are commonly specified for a design life of 50 years or more, though actual life depends on pressure, temperature, soil and installation quality.

Conclusion: Choosing the Right PVC Pipe Manufacturer in Saudi Arabia

Saudi Arabia's PVC pipe market is backed by long-established local factories such as SAPPCO, Neproplast and Al Watania, and by newer producers like ALFA AL-ARABIA and Beta Green. Water security, sewerage upgrades and Vision 2030 projects should keep demand growing through 2026 and beyond. The best supplier is the one whose certifications, product standards and delivery schedule match your specification.

If you need uPVC, CPVC, PVC fittings or valves from an international manufacturer, contact Huasheng for a quotation, or browse the full product catalog.