| Quantity: | |
|---|---|
Class: PN10
Gasket: EPDM/FPM O-ring
Ball seals PTFE
Inserting stainless fixed nut
Size: DN15-50
Actuator: Single-acting, Spring automatic return, normally closed
Open and close time: 1-2s
It can be used in high corrosive environment as it is all plastic material
Matching with solenoid valves and position switch
Widely used in higher safety request applications such as power plant, chemical, oil refining etc because it can take bad environment and maintain easily
d [mm] | DN [mm] | D [mm] | L [mm] | H[mm] | H1[mm] | T[mm] |
| 20 | 15 | 50.00 | 93.00 | 159.00 | 17.00 | 16.00 |
| 25 | 20 | 59.00 | 106.00 | 168.00 | 19.50 | 18.00 |
| 32 | 25 | 70.00 | 116.00 | 168.00 | 23.00 | 20.00 |
| 40 | 30 | 85.00 | 138.00 | 202.00 | 27.00 | 23.00 |
| 50 | 40 | 99.00 | 148.00 | 202.00 | 32.00 | 26.00 |
| 63 | 50 | 125.00 | 168.00 | 225.00 | 38.50 | 30.00 |
The pipes should not be stacked too tightly, and they should be kept away from high temperature and heat source environments, such as heaters, boilers, and steam supply pipes. When placed outdoors, it should be covered with non-transparent materials, and the surrounding air should be circulated to prevent the cover from absorbing heat and generating high temperature, which may cause the tube to fade and deform. PVC products cannot be exposed to high temperature of 65℃, and CPVC pipes cannot be exposed to 98℃.
show room
Administrators have overseas education background or working experiences, they introduce up-to-date management skills and cutting-edge technologies to the team
Over 200 injection machines, 80 mechanical processing equipment, including machinery imported from Taiwan, Japan and Germany
Huasheng established in 1988 who had over 20 years of experience in plastic extrusion and injection
24-hour Rigorous QC Team that follows ISO 9001 quality management system
A rounded system of up-to-date software and testing equipment for R&D
Class: PN10
Gasket: EPDM/FPM O-ring
Ball seals PTFE
Inserting stainless fixed nut
Size: DN15-50
Actuator: Single-acting, Spring automatic return, normally closed
Open and close time: 1-2s
It can be used in high corrosive environment as it is all plastic material
Matching with solenoid valves and position switch
Widely used in higher safety request applications such as power plant, chemical, oil refining etc because it can take bad environment and maintain easily
d [mm] | DN [mm] | D [mm] | L [mm] | H[mm] | H1[mm] | T[mm] |
| 20 | 15 | 50.00 | 93.00 | 159.00 | 17.00 | 16.00 |
| 25 | 20 | 59.00 | 106.00 | 168.00 | 19.50 | 18.00 |
| 32 | 25 | 70.00 | 116.00 | 168.00 | 23.00 | 20.00 |
| 40 | 30 | 85.00 | 138.00 | 202.00 | 27.00 | 23.00 |
| 50 | 40 | 99.00 | 148.00 | 202.00 | 32.00 | 26.00 |
| 63 | 50 | 125.00 | 168.00 | 225.00 | 38.50 | 30.00 |
The pipes should not be stacked too tightly, and they should be kept away from high temperature and heat source environments, such as heaters, boilers, and steam supply pipes. When placed outdoors, it should be covered with non-transparent materials, and the surrounding air should be circulated to prevent the cover from absorbing heat and generating high temperature, which may cause the tube to fade and deform. PVC products cannot be exposed to high temperature of 65℃, and CPVC pipes cannot be exposed to 98℃.
show room
Administrators have overseas education background or working experiences, they introduce up-to-date management skills and cutting-edge technologies to the team
Over 200 injection machines, 80 mechanical processing equipment, including machinery imported from Taiwan, Japan and Germany
Huasheng established in 1988 who had over 20 years of experience in plastic extrusion and injection
24-hour Rigorous QC Team that follows ISO 9001 quality management system
A rounded system of up-to-date software and testing equipment for R&D
