| Name of product | ISO 10931 standard PVDF pipe for industrial applications |
| Materials | Polyvinylidene Fluoride(PVDF) |
| Color | Opaque |
| Connection | Socket fusion/butt fusion |
| Pressure | PN16/16kg |
| Length | 5 meters |
| Standards | ISO 10931 |
| Temperature Range | -20°C - 140°C (-4°F - 284°F) |
| Delivery | 3~20 days after receiving the deposit, depends on the quantity |
| d[mm] | weight[kg] | L[mm] | L1[mm] | e[mm] |
| 20 | 0.019 | 32 | 24 | 1.9 |
| 25 | 0.025 | 34 | 25 | 1.9 |
| 32 | 0.038 | 36 | 25 | 2.4 |
| 40 | 0.054 | 39 | 25 | 2.4 |
| 50 | 0.084 | 42 | 29 | 3 |
| 63 | 0.121 | 47 | 29 | 3 |
| 75 | 0.16 | 49 | 29 | 3.6 |
| 90 | 0.294 | 57 | 34 | 4.3 |
| 110 | 0.48 | 70 | 43 | 5.3 |
| 125 | 0.78 | 79 | 48 | 6 |
| 140 | 1 | 88 | 55 | 6.7 |
| 160 | 1.47 | 100 | 60 | 7.7 |
| 200 | 2.8 | 124 | 75 | 9.6 |
| 225 | 4 | 140 | 85 | 10.8 |
The two-piece flange connection method is as follows:
1 A rubber gasket is required between the flange and the flange connection.
2 The bolt diameter and center distance of the flange should be consistent with the flange bolt diameter and center distance of the connected accessories.
3 Before installing the bolts, make sure that the flange contact surface at the gasket is flat.
4 When the bolts are tightened, the flange axis should be on the same horizontal line, the flange surface should be perpendicular to the pipe axis, and the gap should be uniform.
5 It is best to use a torque wrench to tighten the bolts, and tighten them in order, symmetrical positions, and evenly tighten them, as shown in the figure on the right, to prevent twisting; after tightening, check them one by one (it is recommended to tighten all of them at least three times. Bolts) to ensure the ideal sealing effect.
show room
Administrators have overseas education background or working experiences, they introduce up-to-date management skills and cutting-edge technologies to the team
Over 200 injection machines, 80 mechanical processing equipment, including machinery imported from Taiwan, Japan and Germany
Huasheng established in 1988 who had over 20 years of experience in plastic extrusion and injection
24-hour Rigorous QC Team that follows ISO 9001 quality management system
A rounded system of up-to-date software and testing equipment for R&D
| Name of product | ISO 10931 standard PVDF pipe for industrial applications |
| Materials | Polyvinylidene Fluoride(PVDF) |
| Color | Opaque |
| Connection | Socket fusion/butt fusion |
| Pressure | PN16/16kg |
| Length | 5 meters |
| Standards | ISO 10931 |
| Temperature Range | -20°C - 140°C (-4°F - 284°F) |
| Delivery | 3~20 days after receiving the deposit, depends on the quantity |
| d[mm] | weight[kg] | L[mm] | L1[mm] | e[mm] |
| 20 | 0.019 | 32 | 24 | 1.9 |
| 25 | 0.025 | 34 | 25 | 1.9 |
| 32 | 0.038 | 36 | 25 | 2.4 |
| 40 | 0.054 | 39 | 25 | 2.4 |
| 50 | 0.084 | 42 | 29 | 3 |
| 63 | 0.121 | 47 | 29 | 3 |
| 75 | 0.16 | 49 | 29 | 3.6 |
| 90 | 0.294 | 57 | 34 | 4.3 |
| 110 | 0.48 | 70 | 43 | 5.3 |
| 125 | 0.78 | 79 | 48 | 6 |
| 140 | 1 | 88 | 55 | 6.7 |
| 160 | 1.47 | 100 | 60 | 7.7 |
| 200 | 2.8 | 124 | 75 | 9.6 |
| 225 | 4 | 140 | 85 | 10.8 |
The two-piece flange connection method is as follows:
1 A rubber gasket is required between the flange and the flange connection.
2 The bolt diameter and center distance of the flange should be consistent with the flange bolt diameter and center distance of the connected accessories.
3 Before installing the bolts, make sure that the flange contact surface at the gasket is flat.
4 When the bolts are tightened, the flange axis should be on the same horizontal line, the flange surface should be perpendicular to the pipe axis, and the gap should be uniform.
5 It is best to use a torque wrench to tighten the bolts, and tighten them in order, symmetrical positions, and evenly tighten them, as shown in the figure on the right, to prevent twisting; after tightening, check them one by one (it is recommended to tighten all of them at least three times. Bolts) to ensure the ideal sealing effect.
show room
Administrators have overseas education background or working experiences, they introduce up-to-date management skills and cutting-edge technologies to the team
Over 200 injection machines, 80 mechanical processing equipment, including machinery imported from Taiwan, Japan and Germany
Huasheng established in 1988 who had over 20 years of experience in plastic extrusion and injection
24-hour Rigorous QC Team that follows ISO 9001 quality management system
A rounded system of up-to-date software and testing equipment for R&D
