| Quantity: | |
|---|---|
| CPVC Description： | |
| Items Name: | CPVC Pipe |
| Material: | chlorinated polyvinyl chloride |
| Size: | 20~400 mm |
| Color: | Grey,White or Customized |
| Connection: | Socket,Rubber Ring,Plain End |
| Thickness: | 2.0~29.4mm |
| Standard: | DIN ,ISO |
| Certification: | ISO14001,SGS,ISO9001,CE |
1.CPVC piping system takes chlorinated polyvinyl chloride as main material,adds additives to improve process ability, can be finished by extruding(pipes) or injection mould(fittings)
2.When transporting hot water or corrosive fluid ,CPVC piping system can keep enough strength If the temperature is less than 100℃ and can be long time used under higher pressure.
| Standards of CPVC Testing Material | ||
| Index Name | Unit | Index |
| Density | kg/m3 | 1450-1650 |
| Vicat Softening Temperature | ℃ | ≧110 |
| Vicat Softening Temperature(Fittings) | ℃ | ≧103 |
| Longitudinal Reversion | % | ≦5 |
| Chlorine Concerntration(Mass Percent) | % | ≧60 |
| Hydrostatic Test | －－ | No leafing,no break |
| Hydrostatic Reheat Test | －－ | |
| Drop Impact Test | －－ | TIR≦10% |
| Oven Test | Cal/g/℃ | No lamination,no crack |
| Modulus of Elasticity | MPa | ≧2660 |
| Tensile Strength | MPa | ≧56 |
| Impact Strength | KJ/m2 | ≧16 |
| Coefficient of Linear Expansion | m/m℃ | 3.4×10-5 |
| Thermal Conductivity | Cal/g/℃ | 0.14 |
| Specific Heat | Cal/g/℃ | 0.14 |
| Bulk Resistance | Ω/cm | ≧1015 |
| Dielectric Strength | AC,KV/mm | 13 |
| Flame Retardant | －－ | Self-extinguish |
| (DIN)CPVC Pipes For Industry | ||||
| nominal outside diameter Dn | en nominal wall thickness en | |||
| S pipe series | ||||
| S10 | S6.3 | S5 | S4 | |
| SDR Standard Size Ratio SDR | ||||
| SDR21 | SDR13.6 | SDR11 | SDR9 | |
| 20 | 2.0(0.96)* | 2.0(1.5)* | 2.0(1.9)* | 2.3 |
| 25 | 2.0(1.2)* | 2.0(1.9)* | 2.3 | 2.8 |
| 32 | 2.0(1.6)* | 2.4 | 2.9 | 3.6 |
| 40 | 2.0(1.9)* | 3.0 | 3.7 | 4.5 |
| 50 | 2.4 | 3.7 | 4.6 | 5.6 |
| 63 | 3.0 | 4.7 | 5.8 | 7.1 |
| 75 | 3.6 | 5.6 | 6.8 | 8.4 |
| 90 | 4.3 | 6.7 | 8.2 | 10.1 |
| 110 | 5.3 | 8.1 | 10.0 | 12.3 |
| 125 | 6.0 | 9.2 | 11.4 | 14.0 |
| 140 | 6.7 | 10.3 | 12.7 | 15.7 |
| 160 | 7.7 | 11.8 | 14.6 | 17.9 |
| 180 | 8.6 | 13.3 | - | |
| 200 | 9.6 | 14.7 | - | - |
| 225 | 10.8 | 16.6 | - | - |
| 250 | 11.9 | 18.4 | - | - |
| 280 | 13.4 | 20.6 | - | - |
| 315 | 15.0 | 23.2 | - | - |
| 355 | 16.9 | 26.1 | - | - |
| 400 | 19.1 | 29.4 | - | - |
Note:Considering the request of stiffness,the minimum wall thickness marked with "*"size added to 2.0mm.Use the wall thickness in parenthesis when calculating the hydrostatic test pressure. | ||||
Administrators have overseas education background or working experience, they introduce up-to-date management skills and cutting-edge technologies to the team
Over 200 injection machines, 80 mechanical processing equipments, including machinery imported from Taiwan, Japan and Germany
Huasheng established in 1988 who had over 20 years of experience in Plastic Extrusion and injection
24-hour Rigorous QC Team that follows ISO 9001 quality management system
A rounded system of up-to-date software and testing equipments for R&D
Equipped with a professional factory, Huasheng Pipeline is one of the best manufacturers in China who can offer you DIN ISO EN 15493 industry application,CPVC hot water plastic pipe. We can also offer you the pricelist consultation of DIN ISO EN 15493 industry application,CPVC hot water plastic pipe, welcome to buy our customized products.
| CPVC Description： | |
| Items Name: | CPVC Pipe |
| Material: | chlorinated polyvinyl chloride |
| Size: | 20~400 mm |
| Color: | Grey,White or Customized |
| Connection: | Socket,Rubber Ring,Plain End |
| Thickness: | 2.0~29.4mm |
| Standard: | DIN ,ISO |
| Certification: | ISO14001,SGS,ISO9001,CE |
1.CPVC piping system takes chlorinated polyvinyl chloride as main material,adds additives to improve process ability, can be finished by extruding(pipes) or injection mould(fittings)
2.When transporting hot water or corrosive fluid ,CPVC piping system can keep enough strength If the temperature is less than 100℃ and can be long time used under higher pressure.
| Standards of CPVC Testing Material | ||
| Index Name | Unit | Index |
| Density | kg/m3 | 1450-1650 |
| Vicat Softening Temperature | ℃ | ≧110 |
| Vicat Softening Temperature(Fittings) | ℃ | ≧103 |
| Longitudinal Reversion | % | ≦5 |
| Chlorine Concerntration(Mass Percent) | % | ≧60 |
| Hydrostatic Test | －－ | No leafing,no break |
| Hydrostatic Reheat Test | －－ | |
| Drop Impact Test | －－ | TIR≦10% |
| Oven Test | Cal/g/℃ | No lamination,no crack |
| Modulus of Elasticity | MPa | ≧2660 |
| Tensile Strength | MPa | ≧56 |
| Impact Strength | KJ/m2 | ≧16 |
| Coefficient of Linear Expansion | m/m℃ | 3.4×10-5 |
| Thermal Conductivity | Cal/g/℃ | 0.14 |
| Specific Heat | Cal/g/℃ | 0.14 |
| Bulk Resistance | Ω/cm | ≧1015 |
| Dielectric Strength | AC,KV/mm | 13 |
| Flame Retardant | －－ | Self-extinguish |
| (DIN)CPVC Pipes For Industry | ||||
| nominal outside diameter Dn | en nominal wall thickness en | |||
| S pipe series | ||||
| S10 | S6.3 | S5 | S4 | |
| SDR Standard Size Ratio SDR | ||||
| SDR21 | SDR13.6 | SDR11 | SDR9 | |
| 20 | 2.0(0.96)* | 2.0(1.5)* | 2.0(1.9)* | 2.3 |
| 25 | 2.0(1.2)* | 2.0(1.9)* | 2.3 | 2.8 |
| 32 | 2.0(1.6)* | 2.4 | 2.9 | 3.6 |
| 40 | 2.0(1.9)* | 3.0 | 3.7 | 4.5 |
| 50 | 2.4 | 3.7 | 4.6 | 5.6 |
| 63 | 3.0 | 4.7 | 5.8 | 7.1 |
| 75 | 3.6 | 5.6 | 6.8 | 8.4 |
| 90 | 4.3 | 6.7 | 8.2 | 10.1 |
| 110 | 5.3 | 8.1 | 10.0 | 12.3 |
| 125 | 6.0 | 9.2 | 11.4 | 14.0 |
| 140 | 6.7 | 10.3 | 12.7 | 15.7 |
| 160 | 7.7 | 11.8 | 14.6 | 17.9 |
| 180 | 8.6 | 13.3 | - | |
| 200 | 9.6 | 14.7 | - | - |
| 225 | 10.8 | 16.6 | - | - |
| 250 | 11.9 | 18.4 | - | - |
| 280 | 13.4 | 20.6 | - | - |
| 315 | 15.0 | 23.2 | - | - |
| 355 | 16.9 | 26.1 | - | - |
| 400 | 19.1 | 29.4 | - | - |
Note:Considering the request of stiffness,the minimum wall thickness marked with "*"size added to 2.0mm.Use the wall thickness in parenthesis when calculating the hydrostatic test pressure. | ||||
Administrators have overseas education background or working experience, they introduce up-to-date management skills and cutting-edge technologies to the team
Over 200 injection machines, 80 mechanical processing equipments, including machinery imported from Taiwan, Japan and Germany
Huasheng established in 1988 who had over 20 years of experience in Plastic Extrusion and injection
24-hour Rigorous QC Team that follows ISO 9001 quality management system
A rounded system of up-to-date software and testing equipments for R&D
Equipped with a professional factory, Huasheng Pipeline is one of the best manufacturers in China who can offer you DIN ISO EN 15493 industry application,CPVC hot water plastic pipe. We can also offer you the pricelist consultation of DIN ISO EN 15493 industry application,CPVC hot water plastic pipe, welcome to buy our customized products.
